-
QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.) With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified and is ready to meet future regulatory requirements (Minamata convention & European directives for thermal power plants and incinerators). -
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegasThe operating principle of the SM-3 is based on a completely new technique: mercury compounds cracking and the reduction of ionic mercury contained in stack gas is performed applying the thermocatalytic method. Wet chemical sample gas treatment using reagents and bubblers is avoided. Maintenance and servicing of the SM-3 are therefore extremely easy. -
The SI500 Strathtox is the latest precision respirometer for rapidly measuring actual Activated Sludge bacterial performance. Applications in - Toxicity Management - Nitrification Management - Critical Oxygen Point analysis - Aeration Efficiency - Nutrient Control - Sludge Health - System Trouble-shooting - Short-term BOD - Plant capacity - Respiration tests -
TABLE TOP SEM EM SERIES – TOTAL SEM SOLUTION The SEM can implemented with Elemental analysis functions at the same time. This way you can use your exhisting and preffered brand like oxford, bruker or EDAX to provide the SEM with EDS analysis. In addition, as an integrated device, the equipment can be used at a lower cost than the separately purchased products. -
The 204M is a transportable CEM based on FTIR technology. Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be. With pre-loaded calibration methods for 28 gas species, automatic nitrogen purging, in-built pressure and temperature alarms, analogue and digital I/O it is a complete site-ready back up CEM. The ProtIR 204M and PAS software have been designed to allow stack emission monitoring to be carried out to the Environment Agency’s Technical Guidance Note M22 Measuring stack gas emissions using FTIR instruments (TGN M22) as simply and quickly as possible. With the built-in Standard Analysis Model for common gases there is no complex set-up of analysis required. The software as built-in calculations for drift and residual analysis, following the methods described in TGN M22. Skilled users of the FTIR can use the chemometric building routines of the PAS software to build analytical methods for specific applications. Set up this way, the 204M can measure thousands of possible gas species over ranges from ppm to %Vol. -
Protea 5000 is an ultra-violet (UV), continuous emission monitoring analyser, designed for in-situ analysis of gas-phase emission components. Using absorption spectroscopy, Protea 5000 stores and analyses the full UV spectrum and calculates the gas emission concentrations for e.g. NH3, Cl2, HCl, SO2, F2 and many more. -
“P2000 is an infra-red (IR), duct or stack-mounted Analyser, designed to provide In-Situ analysis of up to six gas-phase emission components such as CO, CO2, SO2, NO, NO2 and many more. A typical system comprises of a stack mounted Analyser, an integral Calibration Module and a Control Unit with options which include a powerful In-Situ Heater and a stand-alone Analysis Software package.
-
For use in the field, ProMass can be provided in a rugged mobile case. With a vacuum start-up in less than 40mins, ProMass can be deployed quickly. Using either the simple PAS-Pro software for unattended operation, or the more complex PAS software for investigation work, ProMass Transportable can give real-time, wide range measurements of any gas.- Leak testing (sniffer mode)
- Syngas analysis
- Environmental testing
- Dissolved gas analysis (with membrane inlet)
- Gas impurity testing
-
Ideally suited to semiconductor production processes, ambient air measurements, leak testing and quality testing for the food industry, the 19” mountable ProMass analyser is a complete process tool. ProMass can be provided with fully integrated vacuum system, or for demanding process applications, an external backing pump is provided – particularly for hazardous area applications. Protea will integrate the ProMass analyser with our sampling control system and industrial analyser controller for a complete measurement system. This can be provided to measure from multiple sample locations is quick succession. -
Laboratory QMS Gas Analyser For laboratory applications across many fields of research, the ProMass analyser can be provided in a desktop format. With integrated vacuum system – turbo molecular drag pump and diaphragm roughing pump – ProMass can be operated straight away. A heated capillary of various materials (stainless steel, PEEK, PTFE, borosilicate) is provided included with temperature control of the capillary. Total pressure gauge, analogue and digital inputs, sample pressure and temperature controlled chamber bake-out are all built-in features to give complete sample control. ProMass uses Protea’s proven RGA quadrupole mass spectrometer that is provided as standard with dual Faraday/SEM detector, closed ion source and 0-200amu range for the analytically focused applications of the ProMass desktop system. -
The APA analysers are suitable and reliable instruments for monitoring oxygen concentrations in various gas analytical control applications including flue gas-, inert gas-, fermentation processes- and process or laboratory control measurements. All analysers are temperature controlled instruments which have been designed for continuous measurements of oxygen concentrations in particle-free and dry sample gas. The analysers are reliable and easy-to-operate instruments. The measuring value and the sample flow through the measuring cell are displayed on the digital display. 2 alarm relays and 1 malfunction relay are available. Sample gas connections as well as connectors for incomi ng power supply, output signals are located at the rear panel of the analyser. The sample gas enters the analyser passing a protective fine-filter which is installed in the front-panel (not for APA 200). An atmospheric pressure sensor is implemented so that the actual absolute barometric pressure can be sent via RS232 and used for calculation or analysis purposes. -
The analyzers can measure the concentration of multiple gases simultaneously. It is based on the single source dual-beam non-dispersion infrared (NDIR) method for CO, CO2 , CH4 , CnHm, H2S , SO2 and a micro-TCD (Thermal Conductivity Detector) gas sensor for H2 and O2 by fuel cell method. The analyzers have a digital pulsable infrared source and dual-beam systems -
The Polludrone Smart is an air quality monitoring device specially developed to monitor ambient air quality. The Polludrone Smart is a compact and connected CAAQMS which offers near real-time air quality data of all the National Air Quality Index (NAQI) parameters. The ease of installation and the requirement for minimal space for deployment makes it a scalable solution to be deployed at multiple locations. For instance, deploying the Smart version creates an air quality sensor network for crucial applications like Smart Cities, Roadside monitoring, Occupational Health monitoring. With rapid urbanization wherein more than 54% of the population lives in cities it is very crucial to understand the environmental health of the city. The Smart Cities mission has Environment as one of the key pillars. Hence, intelligent Air Quality Monitors like Polludrone Smart is a preferred choice for city health monitoring and enabling city authorities to enable data-driven infrastructure and policy level changes. Polludrone Smart measures all the AQI parameters such as PM2.5, PM10, Carbon Monoxide (CO), Carbon Dioxide (CO2), Sulfur Dioxide (SO2), Nitrogen Dioxide (NO2), Ozone (O3), Ambient Noise, Light, UV, Temperature, and Humidity. Therefore, by deploying Polludrone Smart we focus on AQI monitoring. The Polludrone Smart is technologically equipped to offer higher accuracy with features like patented e-breathing technology, humidity correction for Particulate monitoring, Auto device firmware updates, Anti-static inlet to avoid loss of particulate during sampling, and remote calibration capabilities. Additionally, our Intelligent Air Quality Monitoring device can transmit data through various data communication modules like GSM, WiFi, LORA, etc. Hence, the device transmits data to the Oizom cloud in near real-time. Also, it has an inbuilt memory backup to ensure no data loss in case of network failure. The collected data can be visualized on the Oizom IoT Terminal in the form of real-time dashboards, automated reports, and smart alerts. Moreover, the data accessibility through Rest APIs for integration into 3rd party software and Central Command Centre is also possible. -
The Polludrone Pro is an advanced Air Quality Monitoring Equipment specially developed for special purpose pollution monitoring in the ambient atmosphere. The Polludrone Pro is the most reliable air quality monitor for critical applications. For instance, applications like Airport Air Quality Monitoring, Tunnel Air Quality Monitoring, Industrial Fenceline Monitoring, etc can use the Polludrone Pro for monitoring purposes. By deploying a sensor network of Polludrone Pro, our accurate air quality monitoring system, the users utilize the data for various purposes like process optimization, M2M automation, false complaint detection, and air quality impact assessment. Various use cases like ventilation fan automation in tunnels, air quality impact by frequent flights at airports, industrial impact on the surroundings, etc can analyze the air quality by deploying a sensor network of Polludrone Pro. Polludrone Pro measures all the critical ambient Air Quality parameters like PM1, PM2.5, PM10, PM100, Carbon Monoxide (CO), Carbon Dioxide (CO2), Sulfur Dioxide (SO2), Nitrogen Dioxide (NO2), Ozone (O3), Hydrogen Sulfide (H2S), Ambient Noise, Light, UV, Temperature, and Humidity. Additionally, the Polludrone Pro is technologically equipped to offer higher accuracy with features like patented e-breathing technology, humidity correction for Particulate monitoring, Auto device firmware updates, Anti-static inlet to avoid loss of particulate during sampling, and remote calibration capabilities. Polludrone can work on several wired and wireless data communication modules GSM, WiFi, LORA, etc. The device transmits data to the Oizom cloud in near real-time. After that, the collected data can also be visualized on the Oizom IoT Terminal in the form of real-time dashboards, automated reports, and smart alerts. The data can also be accessed through Rest APIs for M2M automation and integration into 3rd party data analytics platforms. -
The Polludrone Lite is a low-cost air quality monitor specially developed to monitor common air polluting parameters in outdoor spaces. The device is cost-effective; hence, it becomes feasible to deploy the devices in multiple locations. The lite version is specially designed for users who want to perform indicative air quality monitoring. It is also an ideal choice for deploying a cost-effective air quality sensor network in places like Smart Campuses, School Air Quality Monitoring, University Monitoring, Real Estate monitoring. Polludrone Lite measures all the essential and common air quality parameters like PM2.5, PM10, CO, and CO2. We focus on particulate matter (PM) and Carbon monoxide monitoring; which are hazardous pollutants in developing cities. The Polludrone lite is technologically able to offer higher accuracy with features like humidity correction for Particulate monitoring, Auto device firmware updates, and Anti-static inlet to avoid loss of particulate during sampling and remote calibration capabilities. Our cost-effective air quality monitors can transmit data through various data communication modules like GSM, WiFi, LORA, etc. The data is transmitted to the Oizom cloud in near real-time. Additionally, it has an inbuilt memory backup to ensure no data loss in case of network failure. This ensures the best device uptime. Hence, the collected data can also be visualized on the Oizom IoT Terminal in the form of real-time dashboards, automated reports, smart alerts. The data can also be accessed through Rest APIs for integration into 3rd party software. -
Get high accuracy, premium performance and ultimate flexibility with the Thermo Scientific Orion Benchtop Meter. Meet your most challenging applications for pH, ion concentration, conductivity, dissolved oxygen and temperature. Easily view measurements on the color display and customize the four meter channels with interchangeable modules. Log up to 2000 data point sets and easily transfer via USB to a computer. Select systems with one or two pH / ISE modules.
