- Highest analytical precision with short
- measuring time
- Catalyst-free high-temperature process at
- 1 200°C with "Fast Change Technology
- Most modern hardware components and
- industry 4.0 features
- Minimal material requirements and
- support costs
- Highest processing quality
- "Made in Germany"
- Global service and support
- Convincing cost of ownership
-
-
The new Mercury Tracker-3000 XS
- lighter - smaller - more comfortable We updated the well-proven Mercury Tracker 3000 IP! The new Mercury Tracker-3000 XS weighs even less, it is smaller, easier to handle and features GPS, a 5.7" color TFT display and new high performance Eneloop battery pack with minimized self-discharge. Needless to say the benefits of the old Tracker were not discarded.- Real time measurement
- High precision measuring principle: atomic absorption (AAS)
- Easy to operate
- Shock proof and corrosion resistant for rugged field operation
- Measuring ranges 0.1-100 / 0-1000 / 0-2000 µg/m³
- High resolution 0.0001 mg/m³
- Data logger integrated
-
Ultrapure water is elemental to the success of your experiments. But finding the right water system for your research goes deeper than water quality alone. You need a smart choice that supports both your science and your budget — on day 1, and with every cartridge and filter change. One that reflects 130 years of innovations, like feed water monitoring, hands-free dispensing and effortless cartridge change-outs. With a Thermo Scientific lab water system, the only thing you’ll have in your water is confidence. Suitable for even the most demanding and sensitive applications, the family of Thermo Scientific GenPure water purification systems exceeds international standards ASTM D1193 Type 1, ISO 3696 Grade 1 and CLSI-CLRW, delivering ultrapure 18.2 MΩ cm water with consistent quality. -
Measuring of Total Gaseous Mercury (TGM) in air and other gases at ultra trace levels
The UT-3000 Mercury Ultratracer provides a compact and reliable tool for measuring mercury in gases at ultra trace levels. Utilizing the high performance GoldTrap amalgamation module and an optimized state-of-the-art AA-mercury vapor detector the UT-3000 Ultratracer offers detection limits at sub-ng/m³ (ppq-parts per quadrillion) levels. -
Ankersmid Universal Filters are known as a reliable technique for the separation of particles from gas, ensuring a flow of clean gas to the analyzer. Filter housings in a variety of materials and standard dimensions are available.
The design of the filter and filter housing also ensures that any liquids present in the gas will be separated from the gas.
Liquids are collected in the bottom of the filter-housing.
Due to its universal standard dimensions and functionality, the filter elements can also be used with any commercially available filter housings.
The filters are easily replaced without the use of any additional tools.
Where needed, a liquid sensor or liquid drain can be installed at the bottom of the filter housing tube.
-
The UT-3000 Ng mobile is specifically designed to measure ultratrace amounts of mercury in natural gas at differing sites. The system, for example, thus allows to monitor the efficiency of different Mercury Removal Units (MRUs) in natural gas processing plants. -
VA-100 ViscoScope sensors van Marimex worden ingezet voor standaard toepassingen en zijn verkrijgbaar met NPT en metrische schroefdraad en VARIVENT®- of Tri-clover® fittingen. De toestellen kunnen in kleine tanks, leidingen met kleine diameter of doorstroomcellen worden geïnstalleerd. De sensoren zijn ontworpen voor de lage en gemiddelde viscositeit varieert, procestemperaturen tot 130°C en zijn bijzonder geschikt voor o.a. toepassingen van verven, lakken etc. -
Inline Viscosity Sensor VA-100
The ViscoScope® sensors are made of high-quality, first-class stainless steel and impress with their intelligent, robust design. All parts in contact with the process are completely welded. Moving parts do not wear out and there are no leaks that damage the inside of the sensor housing. Inside each ViscoScope® viscometer is a Pt100 integrated into the sensor. The VA-100 sensor for viscosity measurement is manufactured as standard and is available with two probe versions in one temperature class and three different process connections.
-
Bepaalde toepassingen eisen op maat gemaakte sensoren. De VA-300 ViscoScope sensoren van Marimex kunnen worden ingezet om een technisch uitvoerbaar ontwerp te realiseren. Niet elke reactor heeft een vrije blokflens voor montage van een sensor. In vele gevallen is er slechts een nozzle beschikbaar. Dit resulteert in een dood volume dat evenwel kan worden overbrugd met een niet-actieve extensie (NAE). De diameter en lengte van de NAE zijn afgestemd op de afmetingen van de nozzle waardoor productophoping in het dode volume wordt voorkomen en de probe diep in de te meten vloeistof wordt gedompeld. Wanneer het toestel in een bocht geïnstalleerd wordt, kan de NAE worden aangepast aan de radius van de buis zodat de stroom niet wordt belemmerd. -
The VS-4450 transmitter is compatible with all VA-100 and VA-300 ViscoScope® sensors and their predecessors. This ensures maximum flexibility when selecting the ideal instrument and replacing older transmitters. The internal resolution is 16 bits, which provides excellent coverage of viscosity ranges over 4 decades (e.g. 1 - 10,000 or 10 - 100,000 etc.). The transmitter can also be adjusted for measurements with a very low difference in viscosity (example: milk and whey). This model features a freely configurable display. Measurement and diagnostic data are transmitted to a process control system via analog or industry standard digital interfaces. The VS-4450 is available with 2 SPDT relays (optional) that provide time-proportional control or alarms. Built to the 19” standard, the transmitter is supplied in the control panel housing unless otherwise requested. However, other suitable housings, e.g. 19” rack, wall or Ex-d housings are possible.” -
Transmitter for viscosity sensors
Maximum flexibility for optimum choice of measuring instrument: The VS-D250 and VS-4450 transmitters are compatible with all ViscoScope® sensors of types VA-100 and VA-300. Viscosity ranges are covered by the internal resolution of 16 bits over four decades (e.g. 1 - 10,000 or 10 - 100,000 etc.). Even for measurements with very small viscosity difference (example: milk and whey) the transmitters work precisely. Both transmitters VS-4450 and VS-D250 are equipped with a freely configurable display. The transmission of measurement and diagnostic data to a process control system is done via industry standard analog or digital interfaces. The VS-4450 is optionally available with 2 SPDT relays for time proportional control or alarms. The VS-D250 model is designed for DIN rail mounting.
-
The VM-3000 Mercury Vapor Monitor measures the mercury concentration in gases continuously. It is used in the laboratory or can be installed at places where mercury has to be monitored. It is a great tool for plenty of different fields of applications in scientific research or the industrial sector:- Work place monitoring
- Research and science
- Emissions monitoring
- Quality control of industrial gas
- Investigation of contaminated sites
- Environmental monitoring
- Hazardous waste inspection
-
The Ankersmid wash bottle serves different purposes. First of all, the wash bottle can wash out sample gases. The second application is its role in maintaining a constant pressure upstream of the analyzer by establishing a constant differential pressure with respect to the atmosphere by using the second inlet. -
YSI has earned a reputation as the Gold Standard in bio-analytical instruments with highly accurate sensors and rapid results.- Analyte-specific results in 60 seconds or less
- Proprietary immobilized enzyme electrodes
- Unique fluidics resist clogging
- Trusted measurement technology
- Automated sample handling
-
We earned with the biochemistry analyzers a reputation as the Gold Standard in bio-analytical instruments with highly accurate sensors and rapid results.
So the key to generating analyte-specific results in 60 seconds or less is YSI’s innovative biosensor technology. Using the inherent specificity of enzymes for a single target analyte, YSI’s proprietary immobilized enzyme electrodes allow a rapid, accurate and largely interference free measurement to be made in about a minute.
Most noteworthy is the unique fluidics and chamber design resist clogging – even at high cell densities.
Thus as a result combining trusted measurement technology with the latest in automated sample handling, the 2900 serie furthers YSI’s legacy of expertise in the following applications:
• Critical bioprocess monitoring and fermentation control
• Biofuel production and research
• Clinical blood chemistry
• Food and beverage processing -
For multiple and parallel bioreactor systems, our 4-channel and 8-channel sampling systems provide many simple and reliable online monitoring and control solutions for your bioreactor processes. Closed-loop monitoring and control capabilities are easily achieved for any scale of operation or type of bioreactor, including single-use systems.