-
ZPA is best suited to the measurement of exhaust gas from refuse incinerators, boilers, and various industrial furnaces.
NO, SO2, CO2, CO, CH4 Non-dispersion infrared-ray absorption methodSingle light source and single beams (single beam system) O2 : Galvanic fuel cell O2 analyzer (built-in) paramagnetic O2 analyzer (built-in), or zirconia O2 analyzer (externally installed TYPE: ZFK7) -
The Ankersmid wash bottle serves different purposes. First of all, the wash bottle can wash out sample gases. The second application is its role in maintaining a constant pressure upstream of the analyzer by establishing a constant differential pressure with respect to the atmosphere by using the second inlet.
-
The VM-3000 Mercury Vapor Monitor measures the mercury concentration in gases continuously. It is used in the laboratory or can be installed at places where mercury has to be monitored. It is a great tool for plenty of different fields of applications in scientific research or the industrial sector:
- Work place monitoring
- Research and science
- Emissions monitoring
- Quality control of industrial gas
- Investigation of contaminated sites
- Environmental monitoring
- Hazardous waste inspection
-
Ankersmid Universal Filters are known as a reliable technique for the separation of particles from gas, ensuring a flow of clean gas to the analyzer. Filter housings in a variety of materials and standard dimensions are available.
The design of the filter and filter housing also ensures that any liquids present in the gas will be separated from the gas.
Liquids are collected in the bottom of the filter-housing.
Due to its universal standard dimensions and functionality, the filter elements can also be used with any commercially available filter housings.
The filters are easily replaced without the use of any additional tools.
Where needed, a liquid sensor or liquid drain can be installed at the bottom of the filter housing tube.
-
Measuring of Total Gaseous Mercury (TGM) in air and other gases at ultra trace levels
The UT-3000 Mercury Ultratracer provides a compact and reliable tool for measuring mercury in gases at ultra trace levels. Utilizing the high performance GoldTrap amalgamation module and an optimized state-of-the-art AA-mercury vapor detector the UT-3000 Ultratracer offers detection limits at sub-ng/m³ (ppq-parts per quadrillion) levels. -
The new Mercury Tracker-3000 XS
- lighter - smaller - more comfortable We updated the well-proven Mercury Tracker 3000 IP! The new Mercury Tracker-3000 XS weighs even less, it is smaller, easier to handle and features GPS, a 5.7" color TFT display and new high performance Eneloop battery pack with minimized self-discharge. Needless to say the benefits of the old Tracker were not discarded.- Real time measurement
- High precision measuring principle: atomic absorption (AAS)
- Easy to operate
- Shock proof and corrosion resistant for rugged field operation
- Measuring ranges 0.1-100 / 0-1000 / 0-2000 µg/m³
- High resolution 0.0001 mg/m³
- Data logger integrated
-
De T-flensoplossing van NEO Monitors is ontworpen om twee LaserGas™ III (Ultra)-analysatoren op één paar flenzen te plaatsen. Dit maakt metingen met lange optische padlengtes mogelijk, terwijl de benodigde ruimte en installatiekosten worden verminderd. Door het compacte ontwerp zijn de spoelvereisten zeer laag, wat de bedrijfskosten verlaagt. Dankzij een zeer configureerbaar ontwerp kan de T-flensoplossing eenvoudig worden aangepast aan verschillende configuraties en toepassingen; individuele analysers kunnen eenvoudig worden vervangen. De certificeringen van de respectievelijke analysers, b.v. EX-d of SIL2 blijven behouden bij gebruik in de T-flensoplossing. Een typische toepassing is verbrandingsanalyse waarbij de T-Flange in combinatie met een LaserGas™ III O2 en een LaserGas™ III CO Ultra de perfecte oplossing is voor procesoptimalisatie en veiligheid.
-
Technically identical to the SM-4, this device is ideal for mercury determination at varying sites. The SM-4 Mobile by Mercury Instruments has been developed on the basis of the well proven SM-4 mercury stack gas monitor. Its measurement principle and technique, its thermocatalytic reactor, the detector and the sample probe are identical with those of the stationary SM-4.
-
QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.) With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified and is ready to meet future regulatory requirements (Minamata convention & European directives for thermal power plants and incinerators).
-
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegasThe operating principle of the SM-3 is based on a completely new technique: mercury compounds cracking and the reduction of ionic mercury contained in stack gas is performed applying the thermocatalytic method. Wet chemical sample gas treatment using reagents and bubblers is avoided. Maintenance and servicing of the SM-3 are therefore extremely easy.
-
The 204M is a transportable CEM based on FTIR technology. Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be. With pre-loaded calibration methods for 28 gas species, automatic nitrogen purging, in-built pressure and temperature alarms, analogue and digital I/O it is a complete site-ready back up CEM. The ProtIR 204M and PAS software have been designed to allow stack emission monitoring to be carried out to the Environment Agency’s Technical Guidance Note M22 Measuring stack gas emissions using FTIR instruments (TGN M22) as simply and quickly as possible. With the built-in Standard Analysis Model for common gases there is no complex set-up of analysis required. The software as built-in calculations for drift and residual analysis, following the methods described in TGN M22. Skilled users of the FTIR can use the chemometric building routines of the PAS software to build analytical methods for specific applications. Set up this way, the 204M can measure thousands of possible gas species over ranges from ppm to %Vol.
-
Protea 5000 is an ultra-violet (UV), continuous emission monitoring analyser, designed for in-situ analysis of gas-phase emission components. Using absorption spectroscopy, Protea 5000 stores and analyses the full UV spectrum and calculates the gas emission concentrations for e.g. NH3, Cl2, HCl, SO2, F2 and many more.