-
LaserGas™ III HF Portable analyzer is compact, lightweight and battery powered instrument which is ideal for HF leakage detection. With on-board pump and connections for Teflon tubing the target gas is continuously transferred into the internal measurement cell. The instrument´s low power design gives long operating time on each battery cycle. The analyzer provides reliable operation with instantaneous response and sufficient dynamic range to measure from sub ppm to several hundred ppm HF concentrations.
-
LaserGas™ III Open Path-gasdetector is speciaal ontworpen voor continue bewaking in explosiegevaarlijke omgevingen. Gebaseerd op onze derde generatie LaserGas™-technologie, is het hele instrument ingebouwd in compacte vuurvaste behuizingen, waardoor het ideaal is voor zone 1-locaties. De LaserGas™ III OP bestaat uit een zender- en ontvangereenheid die tegenover elkaar is gemonteerd op een afstand tot 100 meter. Het laserlicht wordt van de zender naar de ontvanger gestuurd en eventuele veranderingen in de gasconcentratie langs het optische pad van de zender naar de ontvanger worden in realtime gedetecteerd.
-
Single Path monitoren zijn ontworpen voor in-situ meting in schoorstenen, leidingen of reactoren met typische padlengte van 0,5 tot 20 meter. By-pass en extractieve configuraties zijn ook mogelijk. Het compacte ontwerp bestaat uit de zender (met laser module, de optische module en de belangrijkste elektronica) en de ontvanger (met focus lens, fotodetector en ontvanger elektronica). De LaserGas II SP Monitor maakt gebruik van een zender / ontvanger configuratie (diametraal tegenover elkaar gemonteerd) om de gemiddelde gasconcentratie over de optische padlengte te bepalen.
-
Neo Monitors is trots 's werelds eerste in-situ optische analysator voor waterstof aan te bieden. De LaserGas™ II Single Path Hydrogen is een speciaal ontworpen versie die is afgestemd op waterstofmetingen. De sensor blijft onaangetast door verontreinigingen, corrosieve stoffen en heeft geen regelmatig onderhoud nodig. De afwezigheid van extractieve conditioneringssystemen verbetert de beschikbaarheid van de metingen verder en elimineert fouten met betrekking tot monsterbehandeling. Zodra de voeding, datalijnen en spoeling zijn aangesloten, is het instrument klaar voor gebruik en worden metingen in realtime uitgevoerd.
-
De LaserGas-II-Compact Monitor is afgeleid van de standaard Single Path instrumenten en werd geoptimaliseerd voor toepassingen met korte padlengtes tussen 10 en 100 centimeter. Doordat het toestel is voorzien van een gefocuste laserstraal is het mogelijk door zeer dunne insteekbuisjes te meten (<10 mm diameter). Hierdoor is er bij de SP Compact, voor toepassingen waarbij spoeling van de lens ter voorkoming van stofafzetting noodzakelijk is, slechts een zeer beperkt spoeldebiet vereist. Met de optionele interne deshydratiemiddelen kunnen deze toestellen ook worden geoptimaliseerd voor in-situ meting van sporen niveaus van bv O2 en H2O. De LaserGasTMII SP Compact Monitor bestaat uit een zender / ontvanger (gemonteerd diametraal tegenover elkaar) om de gemiddelde concentratie gas langs de optische meetveld te bepalen.
-
LaserGas™ II Open Path is a compact, high performance gas monitor for ambient long distance monitoring. The LaserGas™ II OP consists of a transceiver and retro-reflector unit. The retro-reflector unit consists of one or several cube corners in a weather proof enclosure, which reflects the light back to the transceiver. The detector collects the returned light for calculation of the gas concentration. An optional auto-alignment unit can also be applied to ensure consistent alignment over time.
-
LaserGas™ II Multi Pass combineert extractieve metingen met een compact analyserontwerp. De laserstraal wordt gekoppeld aan een meetcel, waar deze meerdere keren wordt gereflecteerd tussen twee bolvormige spiegels om de gevoeligheid van de analysator te vergroten. De monitor is een kant-en-klaar instrument. Tijdens de installatie zijn geen andere handelingen nodig dan het aansluiten van stroom, het meetgas en optionele spoeling. LaserGas™ MP biedt een betrouwbare en gebruiksvriendelijke oplossing voor een breed scala aan toepassingen.
-
LaserDust™ Medium Path (MP), Long Path (LP) en Extra Long Path (XLP) monitoren zijn compacte, optische stofmonitors voor echte continue in-situ meting van stofconcentratie of opaciteit. De monitoren zijn ontworpen voor metingen over pijpen, schoorstenen en kanalen met typische padlengtes van 0,5 – 10 m. LaserDust™-monitoren gebruiken een zender/ontvangerconfiguratie om de stofconcentratie langs de optische zichtlijn te meten. Onze echte contactloze benadering is superieur aan stofmeters van het punttype. Met innovatieve lasertechnologie combineert de LaserDust™ twee meetprincipes in één instrument.
- Bij lage stofniveaus werkt het met voorwaartse strooilichttechnologie: Het invallende laserlicht wordt verstrooid door stofdeeltjes en verzameld op een solid-state sensor voor stofkwantificering. Deze zeer gevoelige modus maakt detectiegrenzen van < 0,5 mg/Nm3 mogelijk en wordt niet beïnvloed door stofafzetting op de vensters.
- Bij hoge stofniveaus meet de LaserDust™ de doorlaatbaarheid of opaciteit: Lichtabsorptie door stofdeeltjes wordt opgevangen door een 2e sensor.
-
Rapid mercury determination in the laboratory
- Firmly adjusted optical system not requiring any adjustment
- Short analysis times
- Low reagent consumption
- Automatic zero adjustment
- For analyses according to DIN 38406-12 / EPA 7470A / EPA 7471A)
- Measuring range: 0.01 ppb ... 10 ppb (10 ng/l to 10 µg/l)
- Hg trap: Mercury vapors cannot escape into the lab
- Upgradable to VM-3000 Mercury Vapor Monitor
-
Optimization of combustion efficiency and compliance with environmental standards Ideal for combustion control in boilers, incinerators and furnaces. Lowering CO₂, SOx, and NOx emissions while saving energy This oxygen analyser is used to continuously measure oxygen concentration in combustion exhaust gas of industrial boilers or furnaces, and is ideally suited for combustion management and control, such as garbage incinerators and smallest to largest sized boilers, as combustion controllers, achieving a significant energy-saving effect.
-
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
The stationary Flame-Ionisation-Detector (FID) iFiD Wall is made for rough conditions and field installations. This unit measures the Total Hydrocarbon concentration especially in heavy industrial environment or freeair installations with small weatherprotection. The stainless steelhousing with a protection class IP65 gives the analyser a strong shelter all year long. -
19" Rack Flame-Ionisation-Detector iFiD SHED for continuous monitoring
The stationary Flame-Ionisation-Detector (FID) iFiD SHED was designed as a 19" Rackunit. This analyzer is designed to measure volatile organic compounds in different sized SHED-chambers. The device is available in a bypass circuit version and an extraction version. The special advantage of the extraction version is a sample flow of only 12-15ml per minute. The whole gaspath is heated to 200°C and with its unique Pyrolysis cleaning system you can clean easily and save service costs. -
The stationary Flame-Ionisation-Detector (FID) iFiD NMHC measures with its built in NMHC Cutter the methane concentration and parallel in a second channel also the THC in a wide range of applications like stack gas emissions monitoring, ambient air monitoring, thermal reactor and combustor emissions monitoring and also vehicle exhaust gases. The monitoring is continous with a high accuracy, sensitivity and stability. All components which come in contact with sample are fully heated at 200°.
-
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring of 2 channels parallel
The stationary Flame-Ionisation-Detector iFiD Dual is designed for measuring at two points with one unit. This saves money in comparison to a 2 unit solution. The channels are separated from each other and so you can permanently measure high and low concentrations paralell without switching procedure. -
Reliable process control for furnaces, metal industry, semiconductor and gas separation. The analyser continuously measures the concentration of gases such as H2, He, and Ar with high stability. It is also available in a version for hazardous areas (for countries outside the European Union): ZAFE certified Ex NEPSI.
-
The heated transferline is made of a stainless steal tube with soldered heater. This construction is unique in relation to other lines and is guarantee for a very good heattransfer. Especially in cases of alternating process temperatures, the sample temperature can stabilized at preselected level. A Low-Cost-Version is available with simple teflon hose.
-
The heated prefilter model iFiD FIlter XL is a samplegasfilter for the high temperature applications with a permanent temperature of 300°C. The filter is very stable with the temperature level you preselect, and also in permanent operation. In permanent use the maximum temperature is 300°C. The temperature is regulated in a range of + 1%.
-
Deze robuuste draagbare instrumenten zijn geschikt voor sporen zuurstofmetingen van 0,1 ppm tot zuiverheid toepassingen bij 100% zuurstof en delen dezelfde geavanceerde sensortechnologie als de online proces zuurstof analysatoren, waardoor u kunt vertrouwen op hun betrouwbaarheid en nauwkeurigheid. Het concept van Analytical Instruments, waarbij dezelfde HMI en menustructuren worden gebruikt voor draagbare en online analysers, maakt het voor operators uiterst eenvoudig om beide soorten instrumenten op hun locatie te gebruiken zonder dat er extra training nodig is.
-
Ons assortiment zuurstofanalysatoren is ontworpen om gas te bewaken dat wordt geproduceerd of gebruikt in industriële processen waar zuurstofspoor van lage deeltjes per miljoen tot pure O2 nauwkeurig moet worden gemeten. Door gebruik te maken van de hoogwaardige galvanische zuurstofsensoren van AII zijn deze geavanceerde instrumenten eenvoudig te gebruiken met een gemeenschappelijke HMI en menustructuur voor het hele bereik. Operators hoeven slechts één instrument te leren voor meerdere gasanalysetoepassingen bij verschillende zuurstofniveaus. Verkrijgbaar als bench-, 19 "rack-, panel- en wandmontage voor flexibele installatie.
-
- patented world innovation: Sampling and weighting in one system on site!
- intelligent system for isokinetic dust and fine particles measurements in exhaust air ducts and stacks
- acquisition of all necessary gas boundary parameters (humidity of the sample gas, velocity in exhaust gas channel, temperature, pressure)
- pivotable graphic display for more convenient operations
-
The heated prefilter model iFiD Filter is a gasfilter for the high temperature applications who need a permanent temperature up to 300°C. The filter is very stable with the temperature level you can preselected. In permanent use the maximum temperature is 300°C. The temperature is regulated in a range of +-1%.
-
Wall mount Flame-Ionisation-Detector 3001W
The Flame-Ionisation-Detector 3001W measures Total Hydrocarbons in a wide range of applications like catalytic - and thermal oxidiser plants, waste gas processing plants, room and environmental air, solvent recovery plants and vehicle exhaust gases. Because of its swingable housing, there is an easy installation and optimal accessibility guaranteed. This wallmounted analyser is a compact, robust weatherproofed version. The environmental protectionmode is IP65. -
Total Hydrocarbon Analyser
The Flame-Ionisation-Detector 2010 T measures Total HydroCarbon (THC) in a wide range of applications like catalytic- and thermal oxidiser plants, waste gas processing plants, room and environmental air, solvent recovery plants and vehicle exhaust gases.By it`s little weight and it`s compact dimensions, he is especially made for daily changing measuring points or shorttime measurings campains. -
Methaan/THC Analysator
De draagbare verwarmde FID 2010 NMHC van TESTA meet met zijn ingebouwde NMHC-cutter de methaanconcentratie (alleen methaan) en na overschakeling op een ander kanaal ook de THC in een breed scala aan toepassingen zoals bewaking van schoorsteengasemissies, bewaking van omgevingslucht, monitoring van thermische reactor- en verbrandingsemissies en ook uitlaatgassen van voertuigen. De monitoring is continu met een hoge nauwkeurigheid, gevoeligheid en stabiliteit. Alle componenten die in contact komen met het monster worden volledig verwarmd op 200°.