- mobile filter diagnosis unit for triboelectric in-situ monitoring of dust emissions
- measuring probe with variable length to adapt to the local conditions
- immediate clean gas dust content monitoring after the dust collectors
- offline power supply by power bank
- integrated recorder
-
- continuous, tribo-electric in-situ filter monitoring device with EC-Type Examination Certificate (IBExU19ATEXB008 X)
- approved for Ex II 3D Ex ic tc IIIC T80 °C Dc
- suitable for installations in hazardous areas of zone 22
- no separate power supply necessary (2-wire transmitter)
- two probe lengths available (300 and 500 mm)
-
This unique microprocessor controlled Peltier Cooler has been designed with a powerful dew point stabiliser. The dew point is set at 4°C but can be changed at any value between 1 and 15°C. The condensate that is formed should be removed by a peristaltic pump, automatic drain or collection vessel.
The heat exchanger is demountable and PFA®-coated.
The digital controlled cooler has many control and warning features like programmable alarms, mA-output, digital inputs and Modbus or RS485 communication. The alarm status changes when the temperature deviates by • ± 3 °C from the set point.
Available for 230VAC and 115VAC power supply.
-
The APA analysers are suitable and reliable instruments for monitoring oxygen concentrations in various gas analytical control applications including flue gas-, inert gas-, fermentation processes- and process or laboratory control measurements. All analysers are temperature controlled instruments which have been designed for continuous measurements of oxygen concentrations in particle-free and dry sample gas. The analysers are reliable and easy-to-operate instruments. The measuring value and the sample flow through the measuring cell are displayed on the digital display. 2 alarm relays and 1 malfunction relay are available. Sample gas connections as well as connectors for incomi ng power supply, output signals are located at the rear panel of the analyser. The sample gas enters the analyser passing a protective fine-filter which is installed in the front-panel (not for APA 200). An atmospheric pressure sensor is implemented so that the actual absolute barometric pressure can be sent via RS232 and used for calculation or analysis purposes.
-
The APF front panel mounting reliably extra-fine filters solids, in particular very fine particles, from the gas stream for gas conditioning applications. The APF uses a very fine, deep-acting filter element that removes particles larger then 100 nanometer from the gas stream. The large filter surface of the cylindrical filter element guarantees reliable extra-fine filtration and a long service life with low pressure drop.
The APF extra-fine filter was primarily developed for 19" front-plate mounting equipment, as is evident from the APF’s small size that is suited to flat-design equipment
-
The mercury process analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes. Applications include effluent and quality control in chlorine-alkali plants, monitoring of scrubber water of waste incinerators and power plants, control of industrial sewage and purification plants, quality control of sulphuric acid, drinking water. Special version also for concentrated caustic solutions (NaOH, KOH).
-
The Odosense Smart is a smart odour monitoring device specially developed to monitor odorants in the ambient atmosphere. The Odosense smart is a sensor-based IoT powered online odour monitor for peripheral monitoring across odourful sites and activities. So, the smart odour monitor is used for applications like monitoring in and around facilities like solid waste monitoring plants.
Odour monitoring around solid waste plants, dump yards and landfills is very crucial as they are usually around the city vicinity and the odour nuisance could be a health hazard for the surrounding residents. It is also essential to keep a track of odour intensity to take suggestive actions like planning odour mitigation activities. Additionally, in the case of false complaints, the authorities have the data for reference purposes.
Odosense Smart measures odourful parameters such as Sulfur Dioxide (SO2), Hydrogen sulphide (H2S), Ammonia (NH3), Methyl Mercaptan (CH3SH), TVOC (Benzene, Toluene, Xylene), Temperature and Humidity.
The Odosense Smart is technologically equipped to offer higher accuracy with features such as patented e-breathing technology, Auto device firmware updates, and remote calibration capabilities. Additionally, our systems are backed with AI ML algorithms to understand odour levels and impact.
Odosense Smart Odour Monitoring Device can transmit data through various data communication modules such as GSM, WiFi, LORA, etc. So, the data is transmitted to the Oizom cloud in near real-time. Additionally, it has an inbuilt memory backup to ensure no data loss in case of network failure. This ensures the best device uptime. The collected data can be visualized on the Oizom IoT Terminal in the form of real-time dashboards, upon collection on a dense network of data points and integrating weather data we can also generate odour plumes and odour dispersion heatmaps. By integrating data from the Odosense Smart onto 3rd party odour modelling platforms we can also enable advanced analytics on the odour levels. -
The Odosense Lite is a real-time odour monitor specially developed to monitor bad and foul smells in the ambient atmosphere. The Odosense lite is a compact online odour monitor for peripheral monitoring across odourful sites and activities. The low-cost odour monitor is also used for applications like monitoring in and around wastewater treatment plants, waste management facilities, sewage odour monitoring and effluent water odour monitoring. Monitoring around wastewater treatment and sewage treatment plants are essential to keep a track of odour dispersion. Thus, it also enables the maintenance crew to take critical actions at the required intervals for e.g spraying neutralizers at odour hotspots, re-churning the treatment process etc. Odosense Lite measures odourful parameters like Sulfur Dioxide (SO2), Hydrogen sulphide (H2S), Ammonia (NH3), Temperature and Humidity. Odosense Lite measures odourful parameters like Sulfur Dioxide (SO2), Hydrogen sulphide (H2S), Ammonia (NH3), Temperature and Humidity. Oizom’s real-time odour monitor offers higher accuracy. Features like patented e-breathing technology, auto device firmware updates and remote calibration capabilities ensure this. Additionally, our systems are backed with AI ML algorithms to understand odour levels and impact. This Real-time odour monitor can transmit data through various data communication modules like GSM, WiFi, LORA, etc to the Oizom cloud on a real-time basis. Additionally, it has an inbuilt memory backup to ensure no data loss in case of network failure. This ensures the best device uptime. Oizom IoT Terminal – Envizom allows users to visualize data in the form of real-time dashboards. Upon collection on a dense network of data points and integrating weather data, users can also generate odour plumes and odour dispersion heatmaps. Similarly, by integrating data from the Odosense Lite onto 3rd party odour modelling platforms we can enable advanced analytics on the odour levels. Thus, the utilization of odour data extends to various industrial automation applications in an Industrial IoT (IIoT) environment.