The sensors are installed directly in pipes or in tanks.
The sensors are used, for example, in oils, crude oils, paints, lacquers, ethanol, solvents as well as in bulk materials under explosive conditions.
-
The MMS system basically comprises a multiplexer-valve unit and the highly accurate and selective mercury detector VM-3000 Vapor Monitor. A bypass pump maintains a steady flow of sample through the sample filters, sample lines and multiplexer valves. Flow meters with optical alarm sensors guarantee that flow rates are stable. All components are installed inside a protective cabinet. -
The ACC cooler offers precision, safety and long-term stability for extractive analytics. The very low gas dissolution rate is attained owing to the new cooler technology (Patents applied). Both the permanent separation of the condensate from the gas phase, as well as the shorter contact time of the gas in the system, plays important roles in reducing gas dissolution rates. The new cooler incorporates an advanced structural design with housing suitable for both wall-mounting (standard) and 19“-racks by using optional brackets. The coolers can be integrated into the analysis cabinet without empty space requirements at the side for a cooling air outlet. The design enables 1 or 2 heat exchangers to be incorporated either at the factory or at a later time, without any problem. The exchangers can be connected in series or parallel following customer requirements. An electronic system monitors the dew point and controls the integrated fan. A temperature alarm output is wired to the terminal block incorporated of the cooler housing for a safe connection without disassembling the cooler.Available for 230 VAC and 115 VAC power supply.
-
In-line Fiber Optic Measurement cells
Kemtrak industrial process measurement cells are manufactured from the highest quality materials and are designed to the most demanding specifications to ensure long life and the highest reliability. Industrial grade fiber optics transmit cold light to the measurement cell and back. The measurement cell contains no electronics, moving parts or sources of heat that would result in condensation on the optical surfaces and they are well suited for hazardous area operation. -
The Protea 2000 emissions monitoring system is approved forthe analysis of exhaust gases from the engines and boilers of ships and offshore rigs. Robust and with proven reliability, up to six gases can be measured including SO2,CO2 The Protea 2000 emissions monitoring system comprises up to 8 exhaust mounted analysers, each with automatic verification facilities. Emissions data from the entire system is securely managed and displayed at a dedicated Classification Society approved panel PC, with outputs to networks, control systems, and reporting facilities. -
Small, fine, excellent: The Liebherr P30-S sensor in conjunction with the Liebherr FMS moisture measuring installation has become indispensable for many industrial processes. The “Little One” expanded our product portfolio in 2008. Measurement by the Liebherr sensor system is based on the physical principle of capacitance determination in the high-frequency stray field. In addition to their high precision and robustness, the measuring devices from Bad Schussenried are characterised by their reproducibility. Once the sensor has been calibrated, further measuring points can be set up or devices renewed on this basis at any time without great effort. The plant thus always remains reliable, regardless of its previous term and age. -
The Liebherr P78-SC sensor in conjunction with the Liebherr Litronic-FMS/CCS type coating thickness and basis weight determination system has become indispensable for many industrial processes. The areas of use include the coating of paper, box, film, non-woven and textile webs. The sensor installations take place, for example, before and after the squeegee for the exact determination of the coating or the humidity The Litronic-FMS III evaluation and transfer unit, which is a mandatory part of the system, is used to record, process and prepare the values measured by the sensors. The integrated software is used for convenient parametrisation and calibration. Thanks to the various interfaces, signal transmission to the higher-level control is feasible. Measurement by the Liebherr sensor system is based on the physical principle of capacitance determination in the high-frequency stray field. In addition to their high precision and robustness, the measuring devices from Bad Schussenried are characterised by their reproducibility. Once the sensor has been calibrated, further measuring points can be set up or devices renewed on this basis at any time without great effort. The plant thus always remains reliable, regardless of its previous term and age. -
The Liebherr in situ water content determination Litronic-FMS III-RMH12 is used to detect the water content (concentration determination) even in very low ppm ranges in emulsions such as diesel fuel, transmission, hydraulic, engine, roller bearing, transformer and turbine oil as well as in battery systems. -
The CAN bus is used in on- and off-road applications, vehicles in the construction and agricultural sectors as well as in engines. The CAN bus is integrated in the sensor. The sensor meets critical EMC and environmental requirements. The signals are integrated and processed directly in the customer's control. The CAN bus signals communicate directly with the control apparatus. Measurement by the Liebherr sensor system is based on the physical principle of capacitance determination in the high-frequency stray field. In addition to their high precision and robustness, the sensor system from Bad Schussenried is characterised by its reproducibility. Each CAN sensor is individually calibrated and final tested. -
Small, fine, excellent: The Liebherr P78 sensor in conjunction with the Liebherr FMS moisture measuring installation has become indispensable for many industrial processes. The moisture measuring installation was invented in 1985 at the Bad Schussenried factory. Measurement by the Liebherr sensor system is based on the physical principle of capacitance determination in the high-frequency stray field. In addition to their high precision and robustness, the measuring devices from Bad Schussenried are characterised by their reproducibility. Once the sensor has been calibrated, further measuring points can be set up or devices renewed on this basis at any time without great effort. The plant thus always remains reliable, regardless of its previous term and age. -
A self-sufficient moisture measuring installation with high connectivity and many interesting possibilities. With ProfiNet technology on board, extensive signal processing and WEB-based access, we are ready for Industry 4.0. Without Ethernet support, these tasks cannot be accomplished. At the beginning of each measured section, the calibration per product must be carried out by means of reference procedures. The Litronic-FMS IV software enables convenient and rapid parametrisation. The evaluation unit receives the raw values measured by the Liebherr sensors and immediately converts them into the measured value, such as percentage humidity. Up to 16 sensors can be managed via the WEB with one device. A curve manager and material and sample management helps the user to create the product-specific calibration. Once the system has been calibrated, further measuring points can be set up or devices renewed on this basis at any time without great effort. The plant thus always remains reliable, regardless of its previous term and age. In addition to their high precision and robustness, the measuring devices from Bad Schussenried are characterised by their reproducibility. A sensor exchange or a transfer to another measured section is also possible without recalibration. -
A self-sufficient system with almost unlimited possibilities. The Litronic FMS II type moisture measuring installation has been used for decades in a wide range of industries to measure the moisture content of various materials in real time.At the beginning of each measurement section, the calibration per product must be carried out by means of reference procedures. The Litronic-FMS II software enables convenient and fast parameterisation. The evaluation unit receives the raw values measured by the Liebherr sensors and immediately converts them into percentage humidity. Thanks to the various interfaces, transfer to a higher-level control is possible. Measurement by the Liebherr sensor system is based on the physical principle of capacitance determination in the high-frequency stray field. In addition to their high precision and robustness, the measuring devices from Bad Schussenried are characterised by their reproducibility. Once the system has been calibrated, further measuring points can be set up or devices renewed on this basis at any time without great effort. The plant thus always remains reliable, regardless of its previous term and age. -
The ALS liquid-stop protects analyzers against an inrush of liquids from the gas conditioning unit into the analyzer.
This avoids major damages of the analyser.
The best position of the liquid is behind the gas conditioning unit, and before the flow meter going to the analyser.
-
The self-sufficient measuring device for precise water content/moisture determination in the running process guarantees the highest quality and safety in EX-protected production environments, the further processing and refinement of very many emulsions and bulk materials. The PC software enables fast and accurate calibration of the measured sections. -
NEO Monitors’ LaserInspect™ CIMO4 gives the operator the opportunity to remotely operate up to 4 LaserGas™ analyzers from the same display*. The operator have full status overview in an instance of all instruments and is able to perform maintenance tasks directly from the panel. This HMI is designed for the NEO Monitors LaserGas™ family and can easily be integrated into a cabinet. * Separate Ethernet switch is required to operate multiple analyzers -
LaserGas™ III Ultra
It uses the innovative baseline-insensitive TDLAS technique specifically designed for combustion analysis. The Ultra simultaneously meets the requirements of combustion control and safety. That is, high measurement accuracy and high dynamic range with simultaneous real-time measurement capability. Applications with very long path lengths and high gas concentrations are no problem for the Ultra. Thanks to the baseline insensitivity and the use of the proprietary IROSS signal processing, high measurement accuracy is achieved even with complex gas mixtures. LaserGas™ III Ultra CO in combination with LaserGas™ III O2 are a perfect combination for proper combustion control and safety. -
In tegenstelling tot de vorige generaties LaserGas™-producten, meet de LaserGas™ Q-familie in het mid-infraroodspectrum, wat betere detectielimieten mogelijk maakt. Evenals detectie van gassen die niet mogelijk zijn met de meer gebruikelijke nabij-infraroodspectroscopie. De sensor heeft lage onderhoudskosten en vereist geen regelmatig onderhoud. De afwezigheid van extractieve conditioneringssystemen verbetert de beschikbaarheid van de metingen verder en elimineert fouten met betrekking tot monsterbehandeling. De monitor is direct op flenzen gemonteerd, die zijn voorzien van spoelgasaansluitingen en een kantelmechanisme voor eenvoudige uitlijning. Een continue spoelstroom voorkomt dat stof en andere verontreinigingen zich op de optische vensters nestelen. Zodra stroom- en datalijnen zijn aangesloten, worden metingen in realtime uitgevoerd. Download datasheet -
In tegenstelling tot de vorige generaties LaserGas™-producten, meet de LaserGas™ Q-familie in het mid-infraroodspectrum, wat betere detectielimieten mogelijk maakt. Evenals detectie van gassen die niet mogelijk zijn met de meer gebruikelijke nabij-infraroodspectroscopie. De sensor heeft lage onderhoudskosten en vereist geen regelmatig onderhoud. De afwezigheid van extractieve conditioneringssystemen verbetert de beschikbaarheid van de metingen verder en elimineert fouten met betrekking tot monsterbehandeling. De monitor is direct op flenzen gemonteerd, die zijn voorzien van spoelgasaansluitingen en een kantelmechanisme voor eenvoudige uitlijning. Een continue spoelstroom voorkomt dat stof en andere verontreinigingen zich op de optische vensters nestelen. Zodra stroom- en datalijnen zijn aangesloten, worden metingen in realtime uitgevoerd. -
LaserGas™ iQ2 Vulcan is the first in-situ single-flange solution to measure up to four gases (O2, CO, CH4, H2O) as well as the process temperature in a single unit. Based on the well-proven and trusted tunable diode laser absorption spectroscopy (TDLAS) technology, the solution combines cutting-edge design and ground-breaking functionality. It is a complete combustion solution eliminating the need for multiple units. Advanced TDLAS technology enables unmatched reliability and durability. Installation costs of this all-in-one solution are significantly reduced since only one flange is needed. In addition, operational and maintenance costs are kept at a minimum. -
LaserGas™ iQ² analyzer is the first to measure up to four gases (O2, CO, CH4, H2O) and temperature depending on configuration, which eliminates the need for multiple units for combustion analysis. The cutting-edge design and ground-breaking functionality, ensures that the instrument delivers unmatched reliability and durability. Customers may replace existing analyzers where explosion risks or high maintenance issues are a huge concern. -
LaserGas™ III SP is the third generation in-situ analyzer, designed for safety applications with a special focus on SIL-applications and Ex-d. A compact sized instrument which is easy to install. The instrument is a placed in a sealed housing which eliminates the need for instrument purging.The instrument does not require regular maintenance. The monitor is mounted directly onto flanges, which include purge gas connections and a tilting mechanism for easy alignment. Continuous purge flow prevents dust and other contamination from settling on the optical windows. Once power and data lines are connected, measurements are performed in real-time. -
LaserGas™ III HF Portable analyzer is compact, lightweight and battery powered instrument which is ideal for HF leakage detection. With on-board pump and connections for Teflon tubing the target gas is continuously transferred into the internal measurement cell. The instrument´s low power design gives long operating time on each battery cycle. The analyzer provides reliable operation with instantaneous response and sufficient dynamic range to measure from sub ppm to several hundred ppm HF concentrations. -
LaserGas™ III Open Path-gasdetector is speciaal ontworpen voor continue bewaking in explosiegevaarlijke omgevingen. Gebaseerd op onze derde generatie LaserGas™-technologie, is het hele instrument ingebouwd in compacte vuurvaste behuizingen, waardoor het ideaal is voor zone 1-locaties. De LaserGas™ III OP bestaat uit een zender- en ontvangereenheid die tegenover elkaar is gemonteerd op een afstand tot 100 meter. Het laserlicht wordt van de zender naar de ontvanger gestuurd en eventuele veranderingen in de gasconcentratie langs het optische pad van de zender naar de ontvanger worden in realtime gedetecteerd. -
Single Path monitoren zijn ontworpen voor in-situ meting in schoorstenen, leidingen of reactoren met typische padlengte van 0,5 tot 20 meter. By-pass en extractieve configuraties zijn ook mogelijk. Het compacte ontwerp bestaat uit de zender (met laser module, de optische module en de belangrijkste elektronica) en de ontvanger (met focus lens, fotodetector en ontvanger elektronica). De LaserGas II SP Monitor maakt gebruik van een zender / ontvanger configuratie (diametraal tegenover elkaar gemonteerd) om de gemiddelde gasconcentratie over de optische padlengte te bepalen. -
Neo Monitors is trots 's werelds eerste in-situ optische analysator voor waterstof aan te bieden. De LaserGas™ II Single Path Hydrogen is een speciaal ontworpen versie die is afgestemd op waterstofmetingen. De sensor blijft onaangetast door verontreinigingen, corrosieve stoffen en heeft geen regelmatig onderhoud nodig. De afwezigheid van extractieve conditioneringssystemen verbetert de beschikbaarheid van de metingen verder en elimineert fouten met betrekking tot monsterbehandeling. Zodra de voeding, datalijnen en spoeling zijn aangesloten, is het instrument klaar voor gebruik en worden metingen in realtime uitgevoerd. -
De LaserGas-II-Compact Monitor is afgeleid van de standaard Single Path instrumenten en werd geoptimaliseerd voor toepassingen met korte padlengtes tussen 10 en 100 centimeter. Doordat het toestel is voorzien van een gefocuste laserstraal is het mogelijk door zeer dunne insteekbuisjes te meten (<10 mm diameter). Hierdoor is er bij de SP Compact, voor toepassingen waarbij spoeling van de lens ter voorkoming van stofafzetting noodzakelijk is, slechts een zeer beperkt spoeldebiet vereist. Met de optionele interne deshydratiemiddelen kunnen deze toestellen ook worden geoptimaliseerd voor in-situ meting van sporen niveaus van bv O2 en H2O. De LaserGasTMII SP Compact Monitor bestaat uit een zender / ontvanger (gemonteerd diametraal tegenover elkaar) om de gemiddelde concentratie gas langs de optische meetveld te bepalen. -
LaserGas™ II Open Path is a compact, high performance gas monitor for ambient long distance monitoring. The LaserGas™ II OP consists of a transceiver and retro-reflector unit. The retro-reflector unit consists of one or several cube corners in a weather proof enclosure, which reflects the light back to the transceiver. The detector collects the returned light for calculation of the gas concentration. An optional auto-alignment unit can also be applied to ensure consistent alignment over time. -
LaserGas™ II Multi Pass combineert extractieve metingen met een compact analyserontwerp. De laserstraal wordt gekoppeld aan een meetcel, waar deze meerdere keren wordt gereflecteerd tussen twee bolvormige spiegels om de gevoeligheid van de analysator te vergroten. De monitor is een kant-en-klaar instrument. Tijdens de installatie zijn geen andere handelingen nodig dan het aansluiten van stroom, het meetgas en optionele spoeling. LaserGas™ MP biedt een betrouwbare en gebruiksvriendelijke oplossing voor een breed scala aan toepassingen. -
LaserDust™ Medium Path (MP), Long Path (LP) en Extra Long Path (XLP) monitoren zijn compacte, optische stofmonitors voor echte continue in-situ meting van stofconcentratie of opaciteit. De monitoren zijn ontworpen voor metingen over pijpen, schoorstenen en kanalen met typische padlengtes van 0,5 – 10 m. LaserDust™-monitoren gebruiken een zender/ontvangerconfiguratie om de stofconcentratie langs de optische zichtlijn te meten. Onze echte contactloze benadering is superieur aan stofmeters van het punttype. Met innovatieve lasertechnologie combineert de LaserDust™ twee meetprincipes in één instrument.- Bij lage stofniveaus werkt het met voorwaartse strooilichttechnologie: Het invallende laserlicht wordt verstrooid door stofdeeltjes en verzameld op een solid-state sensor voor stofkwantificering. Deze zeer gevoelige modus maakt detectiegrenzen van < 0,5 mg/Nm3 mogelijk en wordt niet beïnvloed door stofafzetting op de vensters.
- Bij hoge stofniveaus meet de LaserDust™ de doorlaatbaarheid of opaciteit: Lichtabsorptie door stofdeeltjes wordt opgevangen door een 2e sensor.
-
Rapid mercury determination in the laboratory- Firmly adjusted optical system not requiring any adjustment
- Short analysis times
- Low reagent consumption
- Automatic zero adjustment
- For analyses according to DIN 38406-12 / EPA 7470A / EPA 7471A)
- Measuring range: 0.01 ppb ... 10 ppb (10 ng/l to 10 µg/l)
- Hg trap: Mercury vapors cannot escape into the lab
- Upgradable to VM-3000 Mercury Vapor Monitor
-
Optimization of combustion efficiency and compliance with environmental standards Ideal for combustion control in boilers, incinerators and furnaces. Lowering CO₂, SOx, and NOx emissions while saving energy This oxygen analyser is used to continuously measure oxygen concentration in combustion exhaust gas of industrial boilers or furnaces, and is ideally suited for combustion management and control, such as garbage incinerators and smallest to largest sized boilers, as combustion controllers, achieving a significant energy-saving effect. -
The Inverse Gas Chromatography-Surface Energy Analyzer or iGC-SEA continues Surface Measurement Systems’ pioneering history with inverse gas chromatography (IGC). The iGC-SEA is a second generation Inverse Gas Chromatography instrument. It is the only commercial instrument based on IGC principle. The unique SMS injection scheme provides a wide range of injection concentrations with high accuracy and reproducibility. -
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
The stationary Flame-Ionisation-Detector (FID) iFiD Wall is made for rough conditions and field installations. This unit measures the Total Hydrocarbon concentration especially in heavy industrial environment or freeair installations with small weatherprotection. The stainless steelhousing with a protection class IP65 gives the analyser a strong shelter all year long.