-
Ambient Level Gas Analyzer The nCLD AL2 is the next generation in two-channel high precision ambient air monitoring instrumentation. Unique in speed and reliability, the nCLD AL2 is modular designed and capable of simultaneously measuring NO, NO2 and NOX. The analyzers expandable capabilities allow assessment of additional nitrogen based parameters. Its graphical user interface also individually displays and connects to other instruments’ data. -
ECO PHYSICS nCLD EL
Gas Analyzer The nCLD EL is the next generation in single-channel NO/NOX measurement. Unique in speed and precision, the nCLD EL is modular designed and allows the continuous measurement of concentrations in the range of parts per million. The measuring principle complies with international emissions monitoring regulations and its new and intuitive user interface individually displays and connects to other instruments’ data. -
ECO PHYSICS nCLD EL S
Gas Analyzer The nCLD EL S is the next generation in single-channel NO/NOX measurement. Unique in speed and precision, the nCLD EL S is modular designed and allows the continuous measurement of concentrations in the range of parts per million. The measuring principle complies with international emissions monitoring regulations and its new and intuitive user interface individually displays and connects to other instruments’ data. connects to other instruments’ data. -
ECO PHYSICS nCLD EL²
Modular Gas Analyzer The nCLD EL2 analyzer is the next generation in two-channel high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD EL2 is modular designed and capable of simultaneously measuring NO, NO2 and NOX from hot and humid gas sources without additional cooler. The new and intuitive graphical user interface also individually displays and connects to other instruments’ data. -
The Odosense Lite is a real-time odour monitor specially developed to monitor bad and foul smells in the ambient atmosphere. The Odosense lite is a compact online odour monitor for peripheral monitoring across odourful sites and activities. The low-cost odour monitor is also used for applications like monitoring in and around wastewater treatment plants, waste management facilities, sewage odour monitoring and effluent water odour monitoring. Monitoring around wastewater treatment and sewage treatment plants are essential to keep a track of odour dispersion. Thus, it also enables the maintenance crew to take critical actions at the required intervals for e.g spraying neutralizers at odour hotspots, re-churning the treatment process etc. Odosense Lite measures odourful parameters like Sulfur Dioxide (SO2), Hydrogen sulphide (H2S), Ammonia (NH3), Temperature and Humidity. Odosense Lite measures odourful parameters like Sulfur Dioxide (SO2), Hydrogen sulphide (H2S), Ammonia (NH3), Temperature and Humidity. Oizom’s real-time odour monitor offers higher accuracy. Features like patented e-breathing technology, auto device firmware updates and remote calibration capabilities ensure this. Additionally, our systems are backed with AI ML algorithms to understand odour levels and impact. This Real-time odour monitor can transmit data through various data communication modules like GSM, WiFi, LORA, etc to the Oizom cloud on a real-time basis. Additionally, it has an inbuilt memory backup to ensure no data loss in case of network failure. This ensures the best device uptime. Oizom IoT Terminal – Envizom allows users to visualize data in the form of real-time dashboards. Upon collection on a dense network of data points and integrating weather data, users can also generate odour plumes and odour dispersion heatmaps. Similarly, by integrating data from the Odosense Lite onto 3rd party odour modelling platforms we can enable advanced analytics on the odour levels. Thus, the utilization of odour data extends to various industrial automation applications in an Industrial IoT (IIoT) environment. -
The Odosense Smart is a smart odour monitoring device specially developed to monitor odorants in the ambient atmosphere. The Odosense smart is a sensor-based IoT powered online odour monitor for peripheral monitoring across odourful sites and activities. So, the smart odour monitor is used for applications like monitoring in and around facilities like solid waste monitoring plants.
Odour monitoring around solid waste plants, dump yards and landfills is very crucial as they are usually around the city vicinity and the odour nuisance could be a health hazard for the surrounding residents. It is also essential to keep a track of odour intensity to take suggestive actions like planning odour mitigation activities. Additionally, in the case of false complaints, the authorities have the data for reference purposes.
Odosense Smart measures odourful parameters such as Sulfur Dioxide (SO2), Hydrogen sulphide (H2S), Ammonia (NH3), Methyl Mercaptan (CH3SH), TVOC (Benzene, Toluene, Xylene), Temperature and Humidity.
The Odosense Smart is technologically equipped to offer higher accuracy with features such as patented e-breathing technology, Auto device firmware updates, and remote calibration capabilities. Additionally, our systems are backed with AI ML algorithms to understand odour levels and impact.
Odosense Smart Odour Monitoring Device can transmit data through various data communication modules such as GSM, WiFi, LORA, etc. So, the data is transmitted to the Oizom cloud in near real-time. Additionally, it has an inbuilt memory backup to ensure no data loss in case of network failure. This ensures the best device uptime. The collected data can be visualized on the Oizom IoT Terminal in the form of real-time dashboards, upon collection on a dense network of data points and integrating weather data we can also generate odour plumes and odour dispersion heatmaps. By integrating data from the Odosense Smart onto 3rd party odour modelling platforms we can also enable advanced analytics on the odour levels. -
Ankersmid Ambient Air Filters AAF 051 / AAF 052 / AAF 053 are used for the filtration of ambient air in gas monitoring systems.
The main applications are in ambient air monitoring and in air conditioning systems.
-
The mercury process analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes. Applications include effluent and quality control in chlorine-alkali plants, monitoring of scrubber water of waste incinerators and power plants, control of industrial sewage and purification plants, quality control of sulphuric acid, drinking water. Special version also for concentrated caustic solutions (NaOH, KOH). -
The APF front panel mounting reliably extra-fine filters solids, in particular very fine particles, from the gas stream for gas conditioning applications. The APF uses a very fine, deep-acting filter element that removes particles larger then 100 nanometer from the gas stream. The large filter surface of the cylindrical filter element guarantees reliable extra-fine filtration and a long service life with low pressure drop.
The APF extra-fine filter was primarily developed for 19" front-plate mounting equipment, as is evident from the APF’s small size that is suited to flat-design equipment
-
The APA analysers are suitable and reliable instruments for monitoring oxygen concentrations in various gas analytical control applications including flue gas-, inert gas-, fermentation processes- and process or laboratory control measurements. All analysers are temperature controlled instruments which have been designed for continuous measurements of oxygen concentrations in particle-free and dry sample gas. The analysers are reliable and easy-to-operate instruments. The measuring value and the sample flow through the measuring cell are displayed on the digital display. 2 alarm relays and 1 malfunction relay are available. Sample gas connections as well as connectors for incomi ng power supply, output signals are located at the rear panel of the analyser. The sample gas enters the analyser passing a protective fine-filter which is installed in the front-panel (not for APA 200). An atmospheric pressure sensor is implemented so that the actual absolute barometric pressure can be sent via RS232 and used for calculation or analysis purposes. -
This unique microprocessor controlled Peltier Cooler has been designed with a powerful dew point stabiliser. The dew point is set at 4°C but can be changed at any value between 1 and 15°C. The condensate that is formed should be removed by a peristaltic pump, automatic drain or collection vessel.
The heat exchanger is demountable and PFA®-coated.
The digital controlled cooler has many control and warning features like programmable alarms, mA-output, digital inputs and Modbus or RS485 communication. The alarm status changes when the temperature deviates by • ± 3 °C from the set point.
Available for 230VAC and 115VAC power supply.
-
- filter monitor for in-situ dust measurement
- compact device
- display showing the measured value in mg/m³ or in line diagram
-
- filter monitor for in-situ dust measurement with EC-Type Examination Certificate (IBExU04ATEX1249 X)
- approved for Ex II 1 / 3D Ex ia / tc IIIC T74 ° C Da / Dc and Ex II 3G Ex nA IIC T4 Gc ic
- compact device
- display showing the measured value in mg/m³ or in line diagram
-
- residual dust sensor for wood processing industry with the EC-type examination certificate
- compact device
- suitable for the construction of filter monitoring systems
-
- extractive optic dust concentration measurement
- measurement in wet, sticky exhaust gas conditions
- optical dust sensor
- suitability tested according to EN 15267-3 (QAL1)
- approved for installations according to IED
-
- filter monitor for in-situ dust measurement
- compact device with display
- suitable for the construction of filter monitoring systems
-
- filter monitor for in-situ dust measurement
- compact device
- suitable for the construction of filter monitoring systems
-
- continuous, tribo-electric in-situ filter monitoring device with EC-Type Examination Certificate (IBExU19ATEXB008 X)
- approved for Ex II 3D Ex ic tc IIIC T80 °C Dc
- suitable for installations in hazardous areas of zone 22
- no separate power supply necessary (2-wire transmitter)
- two probe lengths available (300 and 500 mm)
-
- filter monitor for in-situ dust measurement
- with separate operating unit
- display showing the measured value in mg/m³ or line diagram
-
- mobile filter diagnosis unit for triboelectric in-situ monitoring of dust emissions
- measuring probe with variable length to adapt to the local conditions
- immediate clean gas dust content monitoring after the dust collectors
- offline power supply by power bank
- integrated recorder
-
- filter monitor for in-situ dust measurement
- compact device consisting exclusively of the probe
- suitable for the construction of filter monitoring systems
-
- extractive dust concentration measuring device
- measurement in wet exhaust gases
- triboelectric dust sensor
- adapted design for application in blast furnace gas
-
Get high accuracy, premium performance and ultimate flexibility with the Thermo Scientific Orion Benchtop Meter. Meet your most challenging applications for pH, ion concentration, conductivity, dissolved oxygen and temperature. Easily view measurements on the color display and customize the four meter channels with interchangeable modules. Log up to 2000 data point sets and easily transfer via USB to a computer. Select systems with one or two pH / ISE modules. -
The Polludrone Lite is a low-cost air quality monitor specially developed to monitor common air polluting parameters in outdoor spaces. The device is cost-effective; hence, it becomes feasible to deploy the devices in multiple locations. The lite version is specially designed for users who want to perform indicative air quality monitoring. It is also an ideal choice for deploying a cost-effective air quality sensor network in places like Smart Campuses, School Air Quality Monitoring, University Monitoring, Real Estate monitoring. Polludrone Lite measures all the essential and common air quality parameters like PM2.5, PM10, CO, and CO2. We focus on particulate matter (PM) and Carbon monoxide monitoring; which are hazardous pollutants in developing cities. The Polludrone lite is technologically able to offer higher accuracy with features like humidity correction for Particulate monitoring, Auto device firmware updates, and Anti-static inlet to avoid loss of particulate during sampling and remote calibration capabilities. Our cost-effective air quality monitors can transmit data through various data communication modules like GSM, WiFi, LORA, etc. The data is transmitted to the Oizom cloud in near real-time. Additionally, it has an inbuilt memory backup to ensure no data loss in case of network failure. This ensures the best device uptime. Hence, the collected data can also be visualized on the Oizom IoT Terminal in the form of real-time dashboards, automated reports, smart alerts. The data can also be accessed through Rest APIs for integration into 3rd party software. -
The Polludrone Pro is an advanced Air Quality Monitoring Equipment specially developed for special purpose pollution monitoring in the ambient atmosphere. The Polludrone Pro is the most reliable air quality monitor for critical applications. For instance, applications like Airport Air Quality Monitoring, Tunnel Air Quality Monitoring, Industrial Fenceline Monitoring, etc can use the Polludrone Pro for monitoring purposes. By deploying a sensor network of Polludrone Pro, our accurate air quality monitoring system, the users utilize the data for various purposes like process optimization, M2M automation, false complaint detection, and air quality impact assessment. Various use cases like ventilation fan automation in tunnels, air quality impact by frequent flights at airports, industrial impact on the surroundings, etc can analyze the air quality by deploying a sensor network of Polludrone Pro. Polludrone Pro measures all the critical ambient Air Quality parameters like PM1, PM2.5, PM10, PM100, Carbon Monoxide (CO), Carbon Dioxide (CO2), Sulfur Dioxide (SO2), Nitrogen Dioxide (NO2), Ozone (O3), Hydrogen Sulfide (H2S), Ambient Noise, Light, UV, Temperature, and Humidity. Additionally, the Polludrone Pro is technologically equipped to offer higher accuracy with features like patented e-breathing technology, humidity correction for Particulate monitoring, Auto device firmware updates, Anti-static inlet to avoid loss of particulate during sampling, and remote calibration capabilities. Polludrone can work on several wired and wireless data communication modules GSM, WiFi, LORA, etc. The device transmits data to the Oizom cloud in near real-time. After that, the collected data can also be visualized on the Oizom IoT Terminal in the form of real-time dashboards, automated reports, and smart alerts. The data can also be accessed through Rest APIs for M2M automation and integration into 3rd party data analytics platforms. -
The Polludrone Smart is an air quality monitoring device specially developed to monitor ambient air quality. The Polludrone Smart is a compact and connected CAAQMS which offers near real-time air quality data of all the National Air Quality Index (NAQI) parameters. The ease of installation and the requirement for minimal space for deployment makes it a scalable solution to be deployed at multiple locations. For instance, deploying the Smart version creates an air quality sensor network for crucial applications like Smart Cities, Roadside monitoring, Occupational Health monitoring. With rapid urbanization wherein more than 54% of the population lives in cities it is very crucial to understand the environmental health of the city. The Smart Cities mission has Environment as one of the key pillars. Hence, intelligent Air Quality Monitors like Polludrone Smart is a preferred choice for city health monitoring and enabling city authorities to enable data-driven infrastructure and policy level changes. Polludrone Smart measures all the AQI parameters such as PM2.5, PM10, Carbon Monoxide (CO), Carbon Dioxide (CO2), Sulfur Dioxide (SO2), Nitrogen Dioxide (NO2), Ozone (O3), Ambient Noise, Light, UV, Temperature, and Humidity. Therefore, by deploying Polludrone Smart we focus on AQI monitoring. The Polludrone Smart is technologically equipped to offer higher accuracy with features like patented e-breathing technology, humidity correction for Particulate monitoring, Auto device firmware updates, Anti-static inlet to avoid loss of particulate during sampling, and remote calibration capabilities. Additionally, our Intelligent Air Quality Monitoring device can transmit data through various data communication modules like GSM, WiFi, LORA, etc. Hence, the device transmits data to the Oizom cloud in near real-time. Also, it has an inbuilt memory backup to ensure no data loss in case of network failure. The collected data can be visualized on the Oizom IoT Terminal in the form of real-time dashboards, automated reports, and smart alerts. Moreover, the data accessibility through Rest APIs for integration into 3rd party software and Central Command Centre is also possible. -
The analyzers can measure the concentration of multiple gases simultaneously. It is based on the single source dual-beam non-dispersion infrared (NDIR) method for CO, CO2 , CH4 , CnHm, H2S , SO2 and a micro-TCD (Thermal Conductivity Detector) gas sensor for H2 and O2 by fuel cell method. The analyzers have a digital pulsable infrared source and dual-beam systems -
The APA analysers are suitable and reliable instruments for monitoring oxygen concentrations in various gas analytical control applications including flue gas-, inert gas-, fermentation processes- and process or laboratory control measurements. All analysers are temperature controlled instruments which have been designed for continuous measurements of oxygen concentrations in particle-free and dry sample gas. The analysers are reliable and easy-to-operate instruments. The measuring value and the sample flow through the measuring cell are displayed on the digital display. 2 alarm relays and 1 malfunction relay are available. Sample gas connections as well as connectors for incomi ng power supply, output signals are located at the rear panel of the analyser. The sample gas enters the analyser passing a protective fine-filter which is installed in the front-panel (not for APA 200). An atmospheric pressure sensor is implemented so that the actual absolute barometric pressure can be sent via RS232 and used for calculation or analysis purposes. -
Laboratory QMS Gas Analyser For laboratory applications across many fields of research, the ProMass analyser can be provided in a desktop format. With integrated vacuum system – turbo molecular drag pump and diaphragm roughing pump – ProMass can be operated straight away. A heated capillary of various materials (stainless steel, PEEK, PTFE, borosilicate) is provided included with temperature control of the capillary. Total pressure gauge, analogue and digital inputs, sample pressure and temperature controlled chamber bake-out are all built-in features to give complete sample control. ProMass uses Protea’s proven RGA quadrupole mass spectrometer that is provided as standard with dual Faraday/SEM detector, closed ion source and 0-200amu range for the analytically focused applications of the ProMass desktop system. -
Ideally suited to semiconductor production processes, ambient air measurements, leak testing and quality testing for the food industry, the 19” mountable ProMass analyser is a complete process tool. ProMass can be provided with fully integrated vacuum system, or for demanding process applications, an external backing pump is provided – particularly for hazardous area applications. Protea will integrate the ProMass analyser with our sampling control system and industrial analyser controller for a complete measurement system. This can be provided to measure from multiple sample locations is quick succession. -
For use in the field, ProMass can be provided in a rugged mobile case. With a vacuum start-up in less than 40mins, ProMass can be deployed quickly. Using either the simple PAS-Pro software for unattended operation, or the more complex PAS software for investigation work, ProMass Transportable can give real-time, wide range measurements of any gas.- Leak testing (sniffer mode)
- Syngas analysis
- Environmental testing
- Dissolved gas analysis (with membrane inlet)
- Gas impurity testing
-
“P2000 is an infra-red (IR), duct or stack-mounted Analyser, designed to provide In-Situ analysis of up to six gas-phase emission components such as CO, CO2, SO2, NO, NO2 and many more. A typical system comprises of a stack mounted Analyser, an integral Calibration Module and a Control Unit with options which include a powerful In-Situ Heater and a stand-alone Analysis Software package. -
Protea 5000 is an ultra-violet (UV), continuous emission monitoring analyser, designed for in-situ analysis of gas-phase emission components. Using absorption spectroscopy, Protea 5000 stores and analyses the full UV spectrum and calculates the gas emission concentrations for e.g. NH3, Cl2, HCl, SO2, F2 and many more.
-
The 204M is a transportable CEM based on FTIR technology. Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be. With pre-loaded calibration methods for 28 gas species, automatic nitrogen purging, in-built pressure and temperature alarms, analogue and digital I/O it is a complete site-ready back up CEM. The ProtIR 204M and PAS software have been designed to allow stack emission monitoring to be carried out to the Environment Agency’s Technical Guidance Note M22 Measuring stack gas emissions using FTIR instruments (TGN M22) as simply and quickly as possible. With the built-in Standard Analysis Model for common gases there is no complex set-up of analysis required. The software as built-in calculations for drift and residual analysis, following the methods described in TGN M22. Skilled users of the FTIR can use the chemometric building routines of the PAS software to build analytical methods for specific applications. Set up this way, the 204M can measure thousands of possible gas species over ranges from ppm to %Vol. -
TABLE TOP SEM EM SERIES – TOTAL SEM SOLUTION The SEM can implemented with Elemental analysis functions at the same time. This way you can use your exhisting and preffered brand like oxford, bruker or EDAX to provide the SEM with EDS analysis. In addition, as an integrated device, the equipment can be used at a lower cost than the separately purchased products. -
The SI500 Strathtox is the latest precision respirometer for rapidly measuring actual Activated Sludge bacterial performance. Applications in - Toxicity Management - Nitrification Management - Critical Oxygen Point analysis - Aeration Efficiency - Nutrient Control - Sludge Health - System Trouble-shooting - Short-term BOD - Plant capacity - Respiration tests -
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegasThe operating principle of the SM-3 is based on a completely new technique: mercury compounds cracking and the reduction of ionic mercury contained in stack gas is performed applying the thermocatalytic method. Wet chemical sample gas treatment using reagents and bubblers is avoided. Maintenance and servicing of the SM-3 are therefore extremely easy. -
QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.) With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified and is ready to meet future regulatory requirements (Minamata convention & European directives for thermal power plants and incinerators). -
Technically identical to the SM-4, this device is ideal for mercury determination at varying sites. The SM-4 Mobile by Mercury Instruments has been developed on the basis of the well proven SM-4 mercury stack gas monitor. Its measurement principle and technique, its thermocatalytic reactor, the detector and the sample probe are identical with those of the stationary SM-4. -
The heated 3-way solenoid valve is made for switching 2 heated lines on one analyzer. Beside this there is a second outlet for IR-analyzers or other analyzers built in. -
Linseis introduced the all new STA HP 3 (TGA+DSC) table top high pressure thermogravimetric, simultaneous thermal analysis instrument. The STA HP 3 is the result of 25 years of experience thermal analysis under high pressure. The superior high speed micro-furnace with a maximum temperature of 1200°C, top loading microbalance, true TG-DSC Thermogravimetry-differential scanning calorimetry design permit exiting new opportunities. The table top design, optional vapor generator and different gas dosing systems provides utmost flexibility. Worlds only top loading combined TG-DSC (Thermogravimeter and Differential Scanning Calorimeter). For experiments up to 1200°C and up to 150 bar in reactive or inert atmospheres. Easy user exchangeable TGA or TG-DSC plug and play sensors. The right choice for any given experiment gives you the flexibility to analyze TGA only experiments with volumes up to 1 ml or combined TGA-DSC analysis with up to 0.12 or 0.3 ml volume. TG-DSC Thermogravimetry-differential scanning calorimetry arrangement permits the combined analysis of weight change and caloric events like endothermal or exothermal reactions or phase transitions in one run and under the same temperature, gas and pressure conditions. -
With the magnetic suspension balance LINSEIS MSB PT 1, gravimetric measurements in a wide temperature and pressure range and under aggressive media can be done. Such a magnetic suspension balance consist of a balance for recording the measurement values, a suspension coupling which carries the weight of the sample, a sensor for the position measurement of the levitation part and a control unit to control the suspension coupling. The contact-less transmission of the sample weight is realized with a levitation magnet and a holding magnet. The levitation magnet consists of a permanent magnet and the holding magnet consists of an electromagnet hanging on the balance. The position sensor delivers the actual position of the levitation magnet and the PID controller makes a stable levitation position with the electromagnetic force as the actuating variable. Through the magnetic coupling a micro balance can be set up at environmental condition. Therefore the balance is protected from high temperatures, pressure and aggressive media. With the magnetic suspension balance dimensions like- sorption,diffusion,
- surface tension,and density can be measured easily.
- Furthermore chemical reactions e.g.
- corrosion
- decomposition,and combustion will be recorded
- and production processes can be simulated (coating, polymerisation, dehydration, etc.).
-
The STA PT 1000 is dedicated to analysis of organic materials in a relatively low temperature range up to 1000°C. The TG-DSC is a top loading Thermobalance, which offers a highly user-friendly design. Even at a sample weight of up to 10g the Tara is done electronically. The specially designed furnaces allow fast heating and cooling rates as well as a highly precise temperature control. The system can be optionally equipped with a coupling device for EGA (Evolved Gas Analysis). The instrument is highly suitable for thermal composition, thermal stability and oxidation studies. Features- Top Loading sub microgram balance
- Temperature range RT up to 1000°C (Sample Temp.)
- Exchangeable measuring systems TG – DTA/DSC
- An optional 42/84 position sample robot in combination with the optional automatic gas
- control and automatic evacuating system enables long term unattended operation.
-
De T-flensoplossing van NEO Monitors is ontworpen om twee LaserGas™ III (Ultra)-analysatoren op één paar flenzen te plaatsen. Dit maakt metingen met lange optische padlengtes mogelijk, terwijl de benodigde ruimte en installatiekosten worden verminderd. Door het compacte ontwerp zijn de spoelvereisten zeer laag, wat de bedrijfskosten verlaagt. Dankzij een zeer configureerbaar ontwerp kan de T-flensoplossing eenvoudig worden aangepast aan verschillende configuraties en toepassingen; individuele analysers kunnen eenvoudig worden vervangen. De certificeringen van de respectievelijke analysers, b.v. EX-d of SIL2 blijven behouden bij gebruik in de T-flensoplossing. Een typische toepassing is verbrandingsanalyse waarbij de T-Flange in combinatie met een LaserGas™ III O2 en een LaserGas™ III CO Ultra de perfecte oplossing is voor procesoptimalisatie en veiligheid. -
The Kemtrak TC007 is an easy to operate industrial process fiber optic turbidimeter designed to accurately measure the concentration of light scattering components. Measurements are real time and in-line. Long life solid state LED lamps and precision fiber optics are used to provide drift and noise free measurement at very high precision. The Kemtrak TC007 can be configured to use the nephelometric method of turbidity measurement in accordance with International Standard ISO7027:1999(E). In this mode, a proprietary algorithm mathematically combines the ratio of attenuated and scattered light to accurately monitor the turbidity of the sample. Automatic compensation of sample color and fouling of the optical windows ensures trouble free operation. Maintenance free measurement cells with scratch resistant sapphire windows have no electronics or moving parts making the unit suitable for hazardous area use. -
With the magnetic suspension balance LINSEIS MSB PT 1, gravimetric measurements in a wide temperature and pressure range and under aggressive media can be done. Such a magnetic suspension balance consist of: a balance for recording the measurement values, a suspension coupling which carries the weight of the sample, a sensor for the position measurement of the levitation part a control unit to control the suspension coupling The contact-less transmission of the sample weight is realized with a levitation magnet and a holding magnet. The levitation magnet consists of a permanent magnet and the holding magnet consists of an electromagnet hanging on the balance. The position sensor delivers the actual position of the levitation magnet and the PID controller makes a stable levitation position with the electromagnetic force as the actuating variable. Through the magnetic coupling a micro balance can be set up at environmental condition. Therefore the balance is protected from high temperatures, pressure and aggressive media. -
The Linseis TGA PT1000 for thermogravimetric applications is a toploading Thermobalance, which offers a highly userfriendly design. Even at a sample weight of up to 5g the tara is done electronically. The specially designed furnaces allow fast heating and cooling rates from 0.001 up to 250°C/min as well as a highly precise temperature control from (10°C) RT up to 1100°C. The system can be optionally equipped with a coupling device for EGA (Evolved Gas Analysis). The instrument is highly suitable for thermal composition, thermal stability and oxidation studies. The (optional) calculated DTA signal provides important additional information regarding endothermal or exothermal reactions. Furthermore it can be used as a tool for temperature calibration. Linseis automation system: An optional 42 position sample robot in combination with the optional automatic gas control and automatic evacuating system enables long term unattended operation. For an even higher throughput, a sample robot for up to 84 positions is also available. -
The Linseis TGA PT 1600 for thermogravimetric applications is a toploading Thermobalance, which offers a highly userfriendly design. Even at a sample weight of up to 5/25g the tara is done electronically. The specially designed furnaces allow fast heating and cooling rates as well as a highly precise temperature control. The system can be optionally equipped with a coupling device for EGA (Evolved Gas Analysis). The instrument is highly suitable for thermal composition, thermal stability and oxidation studies. The (optional) calculated DTA signal provides important additional information regarding endothermal or exothermal reactions. Furthermore it can be used as a tool for temperature calibration.
